100G QSFP28 ZR4 optical module, its transmission distance can reach 80 kilometers by connecting single-mode fiber, built-in 4-channel cooling EML laser and PIN detector, using 4-channel 25G NRZ wavelength division multiplexing technology (LWDM4), the transmission rate can be Up to 100Gpbs, mainly used in 100G Ethernet, data center, telecom and other scenarios.
The 100G QSFP28 ZR4 optical module overcomes the disadvantages of large size and high power consumption. It is cost-optimized, small in size and low in power consumption. It can provide a point-to-point solution in the data center without deploying legacy CFP/CFP2 interfaces, and can be used for up to Operates on a point-to-point link of 80km.
|Cisco Compatible||QSFP-100G-ZR4-S||Vendor Name||Huihongfiber|
|Form Factor||QSFP28||Max Data Rate||103.125Gbps (4x 25.78Gbps)|
|Wavelength||1310nm||Max Cable Distance||80km|
|Connector||LC Duplex||Cable Type||SMF|
|Transmitter Type||EML||Receiver Type||APD|
|DDM/DOM||Supported||Commercial Temperature Range||0 to 70°C (32 to 158°F)|
|TX Power||2~6.5dBm||Receiver Sensitivity||<-28dBm|
|Power Consumption||≤6W||Extinction Ratio||>6dB|
|Modulation Format||NRZ||CDR (Clock and Data Recovery)||TX & RX Built-in CDR|
|Packaging Technology||BOX Packaging||Host FEC||Supported|
|Bit Error Ratio (BER)||5E-5||Protocols||QSFP28 MSA Compliant|